I2M

Sensors

  • Försäljning
  • €395,95
  • Ordinarie pris €376,95
Skatt ingår. Fraktberäknas i kassan.


I2M Acquisition systems can be used with any 0-5V linear output analog sensor, of any brand. In this page you can find the available sensors to be used plug&play by our sensor cable.

Plug & play sensor wiring for Chrome and DasyX

This wiring let you easily connect the Chrome or DasyX to different sensors using the data acquisition connector. It is configured to connect a speed sensor for the front wheel, the pressure sensor for the brake, two potentiometers and two tyre temperature sensors. Each input can also be used for any other type of analog sensor.

Infrared temperature sensor

It is suitable for measuring the tyre temperature. Temperature range 0-150 °C. Analog output 0-5V. Compatible with all data acquisition systems.

Inductive speed sensor

It allows you to acquire speed signals from the rear wheel (if your bike doesn't have the original one) or from the front wheel. It enables to detect speed differences between the two wheels cased by skidding.

Potentiometer shield

Available for 150mm length potentiometers, carbon made, help in protecting the potentiometer from dirt and in reducing damages in case of crashes.

Linear potentiometer

Linear potentiometers are available in 150mm or 75mm length for rear or front suspension. International Protection (IP) Rating IP66. Working temperature range -30...+100 °C. Equipped with 0,5m cable. Compatible with all data acquisition systems.

Potentiometer collar

Available for 52, 54-55 and 56-58mm fork sheaths. For R1 15-19, R6 17-19, RSV4, BMW 09-18, ZX10R 2016, GSXR 1000R 17-19, Ducati V4 is also available the support to be mounted at the base of the potentiometer, depending on the bike, on the attack brake caliper, on pressurized fork reservoir or directly on the stem (43mm).

Potentiometer spacers

M4 male/female spacers available 12, 15, 18 and 20mm lengths can be used for mounting on preset shock absorbers or for extending the total potentiometer length.

0-50bar pressure sensor

It is used for measuring the braking system pressure. The analog output voltage, linear between 0 and 5V, makes it compatible with all data acquisition systems. It allows you to understand HOW and how much you are breaking thus optimizing this really important driving skill. (FrenTubo link is sold separately).

LS1 Module

Controller for bosh 4.9. lambda sensor Completely plug&play with our sensor wiring. Analog output 0-5V, it needs only 12V under key. Output range: 8-22 AFR. Lambda sensor included.

Lambda Bosh 4.9

Oxygen stoichiometric sensor.

C270 aluminum case camera

La camera Logitech C270 camera is sold with a CNC anodized aluminum black case it makes the camera waterproof and can be used to fix it to the bike by the standard gopro links.

TPMS Sensor

The TPMS sensor is sold with adaptor for 8.5mm or 11.5mm valves.(Valve is not included).

Thermocouple interface

The thermocouple interface, contains an amplifier for type K thermocouples, allows you to connect a thermocouple in a plug & play way to our sensor wiring.

PT100 interface

The PT100 interface, containing an amplifier inside, allows you to connect PT100 temperature sensors to our sensor wiring.

Speed Interface / TPS Interface for GSXR 1000 2017-2020

These two interfaces allow on GSXR 1000 2017-2020 to acquire the signal of the rear wheel and to filter the TPS and APS reading in an analog way.